Casedry Engine Crankcase Dryer

 Casedry is a low cost solution for moisture buildup in your crankcase.  

Installation Instructions:

1.     Stop engine.

2.     Remove lid from Casedry jar. (be sure shipping seal is removed from mouth of jar)

3.     Install fill tube adaptor to Casedry jar.

4.     Remove factory oil cap from fill tube.

5.     Grip Casedry adaptor and install on oil fill tube as with factory oil cap. *

6.     Plug oil vent tube(s). ( a piece of tape may be required over the ice bypass)

Removal Instructions:

1.     !!!Remove plugs from oil vent tubes!!!

2.     Grip Casedry adaptor and remove as with factory oil cap.*

3.     Install Factory Oil cap.

4.     Remove fill tube adaptor from Casedry jar.

5.     Install lid to Casedry jar to prolong Silica Gel life. 

Warning: Shake the Casedry jar before installing to ensure the silica gel screen is intact. If silica gel is leaking from the case dryer do not install it on your engine.

*Do not over tighten the Casedry adaptor to the oil fill tube. Damage to the engine can result.

For more information please visit contacts page and contact us